Jun 062013

Selespeed system oil level must be checked with the car level and the engine cold.

To check the level, proceed as follows:

  1. Detach the bleeder pipe and remove the cap, and check that the level is at the MAX level on the dip stick that is integral with the cap.
  2. If the oil is below the MAX level, top up until the correct level is reached.
  3. After screwing the cap back on, insert the bleeder pipe fully onto the cap tip and turn the ignition key to STOP.
Hydraulic oil container

Hydraulic oil container

Use only “Tutela CS Speed” oil for topping up!

 Posted by at 5:31 pm